Best way to apply cpu thermal paste

Will your thermal paste application method impact your CPU temperatures? Because, generally speaking, that one little cpu chip is simultaneously the smallest, most delicate, and most expensive part of your system. If possible can you send a video of the best technique. In this case, you would need to purchase a new CPU cooler, remove the old cooler, clean the old paste off of the CPU , apply new thermal paste , and then attach . The best way to do it, according to this article, is to apply it in such a way that the paste is mostly on top of where the chip is underneath the heatspreader.

We would like to thank Overclockers UK for sending us the Thermal Grizzly Hydronaut Paste , which costs £10.

The best technique to apply thermal paste is something that is often debated on the internet, so in this article we want to do our own testing to find the best method for applying thermal paste. First we will see how each technique spreads the thermal paste across the CPU , and then we will test each . Getting the right thermal paste and properly applying it can significantly improve the temperature and therefore the performance of your CPU or GPU. I know the spread method is one. Just as the wrong kind of paste and a bad appliance method can actually worsen the performance. Follow this general guide to reapply thermal paste after removing a heat sink or CPU during a repair.

For more advanced directions. To apply new thermal paste , use the application method recommended for your specific processor type —vertical line, horizontal line, middle dot, or surface spread.

Route to Thermal Compound Instructions: By choosing the CPU brand below you will be directed to the application methods page by CPU brand and family. Choose the CPU brand you have: Intel, AMD. All trademarks used in this site are the property of their owners.

Check these best ways to apply thermal paste to CPU. In other words: is it a real problem if paste touches the outside of the CPU , . If you find that thermal paste. So I wish to remove old thermal paste from the bottom of my fan and top of processor. Is rubbing alcohol from the local pharmacy too impure?

Secon what is the best method for applying thermal paste ? Back when I created this rig, it was my . Do i apply it on the heat sink or cpu ? What method is best for a newbie? After viewing some videos on how to apply thermal paste where most of them apply the paste as a little blob in the middle of the cpu it occurred to me this is not the best way. I thought that it may be better to spread the paste around on the cpu so all parts of the cpu are covered. Or on the bottom of the .